Pallet Jack CAD Block
Hand pallet truck of 1520 x 520 mm and electric pallet truck of 1636 x 720 mm, both with 1150 mm forks.
Hand pallet truck, 2,200 kg, forks 1150 x 520 mm
Electric pedestrian pallet truck, 1,600 kg, forks 1150 mm, with EUR pallet
- Units
- Millimetres (INSUNITS 4), drawn at paper size
- Formats
- DWG 2010 · DXF R2010
- Opens in
- AutoCAD and AutoCAD LT 2010 or later, BricsCAD, ZWCAD and DraftSight. The DXF opens in most CAD programs.
- Views
- Plan view + Front elevation
- License
- Free for personal and commercial projects. License
This download has two pallet jack blocks: a hand pallet truck rated 2,200 kg with 1150 x 520 mm forks, and an electric pedestrian pallet truck rated 1,600 kg with 1150 mm forks and a Euro pallet on board. Both come in DWG and DXF with a plan and a side elevation in millimetres, as IND_HAND_PALLET_TRUCK_PLAN, IND_HAND_PALLET_TRUCK_ELEV and the matching electric truck blocks.
Hand pallet truck dimensions
The hand pallet truck is drawn to the VDI 2198 data table of a typical 2,200 kg model with the 1150 mm fork: 1520 mm overall length, 373 mm to the fork face, 520 mm over the forks and forks of 53 x 150 x 1150 mm. The forks sit at 83 mm when lowered and lift 122 mm. The tiller reaches 1234 mm, the steer wheels are 170 mm and the load rollers 82 mm in diameter, on a 1110 mm wheelbase.
Electric pallet truck drawing with Euro pallet
The electric pallet truck follows the data sheet of a typical 1,600 kg pedestrian model: 1636 mm overall length, 486 mm to the fork face, 720 mm overall width and forks of 55 x 150 x 1150 mm, 513 mm across. The tiller grip is at 1237 mm in the drive position. The truck runs on a 230 mm drive wheel, 85 mm load rollers and 100 mm stabiliser castors, with a 1252 mm wheelbase and a 1433 mm turning radius (Wa).
The file holds a separate Euro pallet block of 1200 x 800 x 144 mm (EN 13698-1) sitting on the forks, which you can delete or reuse on its own. The body and cover heights of both trucks are representative, because the data sheets give lengths, widths and fork and tiller heights but not the hood height. Each truck is one catalogue model, so check the figures with the truck you buy.
Using the pallet jack block in a warehouse plan
In plan, a pallet jack block shows how much floor a truck and its load take in a lane, at a door or in front of a pallet racking run. With the 1433 mm turning radius of the electric truck you can check turns between the racks and the dock. For loads that have to go above floor level, the electric stacker block uses the same layers and the same side view.
